Material: electronic components + plastic;Power supply voltage: 7.4V-11.1V (Lipo 2S-3S);Power socket: T plug; Wiring method: The ignition cap head is connected to the glow plug or spark plug, the ground wire is connected to the metal shell of the engine, and the T plug...

Features: 1. This clutch assembly is specially suitable for CISON inline four-cylinder engine models. The clutch is installed between the engine and the gearbox, which can output the engine's power to the gearbox, and then drive the transmission system to operate, thereby achieving smooth...

Information: Material: Alloy;Product name: DC generator model;Weight: 300g;Spindle link mode: belt link;Power generation voltage: 12V; Features: 1. This is a miniature DC generator model. It is made of alloy material and is exquisite and beautiful. It has a very simulated design and restores real...

parameter:Material: stainless steel + aluminum alloy;Size: 16.5*9*13CM;Weight: 1200G;Gear position: 1-2-3-N-R (three forward gears, one neutral gear, and one reverse gear)Overall speed ratio: gearbox (1-1.8-3) × transfer case (5) Features: 1. Actual scale: suitable for 1/8 or 1/10 model cars, accurately restoring the appearance and...

Suitable for CISON twin-cylinder four-cylinder engine model, carburetor

Dimensions: Total length with shaft 70mm, total length with tie rod 86mm, width 40mm.Box size: 40*40*56mm, shaft length 60mm;Input and output shaft diameter 5mm;Deceleration ratio: 1/2 and 1/11;Speed ratio: forward 26/59, backward 19/14/59 The gearbox is entirely made of metal, with reverse, neutral and...

Material: Alloy Packing list: clutch set assembly*1. Features:1. Suitable for modification of Toyan V800 engine model, and can be used for model cars or boats.2. Please select the type of transmission device you need to match according to your needs.3. A certain amount of...

Features: 1. This clutch assembly is specially suitable for TOYAN FS-L400 in-line four-cylinder four-stroke water-cooled methanol engine model. The clutch is installed between the engine and the gearbox, which can output the engine's power to the gearbox, and then drive the transmission system to...

Material: aluminum alloy + cotton Features: The size of the oil filter is 23mm long, 11mm wide and 39mm high. The outer shell is made of alloy aluminum and the filter cotton is used inside. It is removable and easy to replace the filter...

Features: 1. This clutch assembly is specially suitable for TOYAN FS-L200 twin-cylinder four-stroke engine model. The clutch is installed between the engine and the gearbox, which can output the engine's power to the gearbox, and then drive the transmission system to operate, thereby achieving...

Excellent quality: high quality, good ignition effect and long service life. Since the spark plug gap is different from the regular one, do not use it on other engine models.

Features: 1.Made of metal, it is sturdy and durable, cost-effective and has a long service life. It generally needs to be matched with a corresponding head cap to make it easier to use; 2. High-precision mold and machine manufacturing, good quality, high precision, worry-free...

Product parameters:Product materials: metal, plastic;Product color: black;Product size: 100*80*50mm;Product weight: 100g;Gross weight/net weight: 120/100g; Product features: This product is a two-in-one carburetor with pump, suitable for FS-L200 Tuoyang engine; Packing list: carburetor*1;

Material: plastic + copper;Power supply voltage: 7.4V-11.1V (Lipo 2S-3S);Power socket: T plug one to three;Wiring method: T plug connected to the battery; Features: The power T socket is divided into multiple sockets, which is convenient for DIY combination of integrated modules, and is widely...

Material: plastic + copper; Wiring method: The positive glow cap is connected to the glow plug or spark plug, and the negative ground wire is connected to the metal shell of the engine;High quality: Made of high temperature and high pressure silicone material, good...

Product parameters:Material: aluminum alloy;Base size: 200*135*30mm;Fuel tank size: 100*36*50mm;Fuel tank capacity: 100cc;Applicable age: 14+;Packaging: boxed; Packing list: base*1, fuel tank*1, oil pipe*1, support column*4, fixing screws*4. Features: 1. This installation fixed base set is specially suitable for SEMTO ST-NF2 L2 engine model. The holes...

Modified flywheel: diameter 50mm, including induction magnet and fixed nut High voltage pulse igniter parameters:Input voltage: 7-16VOutput voltage: 15-20KVIgnition cap head: 90° black cap headHall sensor: Install and fix by yourself Electric start module parameters:Starting method: direct drive motorStart switch: Push start buttonSupply voltage:...

Parameters: Material: electronic components + plastic;Type: high voltage pulse igniter;Input voltage: 6V-12V;Output voltage: 15KV-20KV;Frequency: 0-15000r/min;Power plug type: JST plug; Description: This CDI igniter uses high-quality electronic components and hand-welded circuits to ensure stable ignition, good effect and long service life. The igniter is commonly...

material: metal; Features: 1. Exquisite appearance: Small and novel in shape, it can be placed in the palm of your hand like a treasure. It is exquisite and mini, making people unable to put it down. It is an excellent craft;2. High quality: The...

Information:Material: Alloy;color: blue;Product name: Strong magnetic DC generator model;Size: 90*80*80mm;Weight: 450g;Spindle link mode: belt link;Power generation voltage: 5-12V; Features: 1. This is a miniature DC generator model. It is made of alloy material and is exquisite and beautiful. It has a very simulated design...

Material: electronic components + plastic;Starting method: direct drive motor;Start switch: push-type start button;Power supply voltage: 7.4V-11.1V (Lipo 2S-3S);Power socket: T plug; Wiring method: the positive and negative wires are connected to the starter motor, and the T plug is connected to the battery; Features:...

Material: electronic components + plastic;Starting method: 30A brushless driver;Start switch: push-type start button;Power supply voltage: 7.4V-11.1V (Lipo 2S-3S);Power socket: T plug; Wiring method: The ignition cap head is connected to the glow plug or spark plug, the positive and negative wires are connected to...

Material: electronic components + plastic;Startup method: brush driver;Start switch: push-type start button;Power supply voltage: 7.4V-11.1V (Lipo 2S-3S);Power socket: T plug; Wiring method: The ignition cap head is connected to the glow plug or spark plug, the positive and negative wires are connected to the...